Categories
Shopping cart
You have no items in your shopping cart.

BioSpec Products Tissue Tearor™ and probe

Tissue-Tearor

The Tissue-Tearor is a rotor/stator type tissue homogenizer which can rapidly homogenize, disrupt, and emulsify samples in 0.2 - 1000 ml of liquid. Complete homogenization of tissues (muscle, liver, breast tissue, etc.) is usually achieved in ten to thirty seconds. Little, if any, heat is produced during the process.

If you need 230 volt unit, please select the models that end in EUR. Four different probe sizes are avaliable - the 04, 07, XL, and 14. Unlike most other Brands of rotor-stator homogenizer, the Tissue-Tearor comes complete with both the high speed motor and a stainless steel probe of your choice. See chart for selection guidance.

Product Description

Tissue Tearor ProbesDuring operation, the suspended material is drawn into the bottom half inch of the homogenizer probe by a rotor turning at 35,000 rpm. The material is repeatedly cycled through narrow slits in the probe where it is rapidly sheared and disintegrated by high frequency mechanical action.

Catalog Number Practical Working Range (ml) Probe Diameter (mm) Working Probe Length (cm)
985370-04 0.5-5.0 4.5 4.8
985370-07 1-50 7 8.3
985370-14 5-1000 14 13.2
985370-XL 1-50 (use w. 50ml tubes) 7 10.9

* Dimensions taken from stator.

The Tissue-Tearor comes complete with a high speed, variable speed electric motor, one probe of your choice and a plastic storage stand.* All Tissue-Tearors are priced the same. All probes are interchangable with the TT motor. See Parts & Acc's above to order additional probes alone.

* The Tissue-Tearor with the 14 mm diameter probe does not come with a plastic storage stand.

Features

  • Use for mixing, emulsification, shredding, or chopping
  • Practical answer for small samples
  • Easy to hold and light weight for one hand operation. Can also be stand mounted
  • Autoclavable stainless steel probes. Inert to aggressive solutions
  • All probes are interchangable and are easily removed for cleanup
  • High speed motor. Variable speed control from 5,000 to 35,000 rpm

Specifications

  • Sample Volume Range: 0.2 to 1000 ml, depending on the probe selected (see table)
  • Universal Motor: 120 volt, 138 watts or, for overseas applications, 230 volt
  • Probes made of Type 316 Stainless Steel with flurocarbon bushings
  • Weight: Approximately 1/2 Kg