15ml & 50ml Tube Transformable Cube Racks With inserts, each rack can be transformed into a 16 x 15ml tube rack or a 9x50ml tube rack 2 inserts/rack, 5 racks/pack
Interlocks on every side ! Four 50ml conical tubes, Ten 15ml conical tubes, Twelve 12x75ml tubes, or Sixteen 1.5-2.0ml microtubes Assorted (Bl, Grn, Pk, Yl, Org) 5/pack
Photo: Top Rack 15-place, Two-Piece BenchTop unit For 15ml & 50ml conical tubes Lower section holds water or crushed ice. Made from polystyrene, Stackable, 1 each
For 10-13mm tubes & culture tubes, 90-place (6x15) No-Wire Autoclavable Rack, 1 each Submersible and Stackable. Dim: 24.6 x 10.4 x 6.4cm (9.7" x 4.1" x 2.5”)
For 13-16mm tubes & culture tubes, 60-place (5x12) No-Wire Autoclavable Rack, 1 each Submersible and Stackable. Dim: 24.6 x 10.4 x 6.4cm (9.7" x 4.1" x 2.5”)
For 16-20mm tubes & 15ml conical tubes, 40-place (4x10) No-Wire Autoclavable Rack, 1 each Submersible and Stackable. Dim: 24.6 x 10.4 x 6.4cm high (9.7" x 4.1" x 2.5”)
For 20-25mm tubes & culture tubes, 24-place (3x8) No-Wire Autoclavable Rack, 1 each Submersible and Stackable. Dim: 24.6 x 10.4 x 6.4cm (9.7" x 4.1" x 2.5”)
For 25-30mm tubes & 50ml conical tubes, 21-place (3x7) No-Wire Autoclavable Rack, 1 each Submersible and Stackable. Dim: 24.6 x 10.4 x 6.4cm high (9.7" x 4.1" x 2.5”)
For 10-13mm tubes & culture tubes, 90-place (6x15) No-Wire GRIP Autoclavable Rack, 1 each Submersible and Stackable. Dim: 24.8 x 10.5 x 7cm (9³/₄" x 4¹/₈" x 2³/₄")
For 15-16mm tubes & culture tubes, 60-place (5x12) No-Wire GRIP Autoclavable Rack, 1 each Submersible and Stackable. Dim: 24.8 x 10.5 x 7cm (9³/₄" x 4¹/₈" x 2³/₄")
For 18-20mm tubes & culture tubes, 40-place (4x10) No-Wire GRIP Autoclavable Rack, 1 each Submersible and Stackable. Dim: 24.8 x 10.5 x 7cm (9³/₄" x 4¹/₈" x 2³/₄")
OneRacks™ Tube Racks, for 5 Tube diameter sizes White Color, Made from Delrin Polymer (-40 to +121°C)
• Tube Racks for 5 different size tube diameters (12-13mm, 16-17mm, 18-20mm, 25mm, and 30mm diameter tubes) Rack Features • Molded coordinates for tube orientation • A stable design for use in water baths • A flat labeling area for easier identification • Unique 'tear drop' shaped openings for better retention of tubes • The highest chemical and heat resistance (-40 to +121°C), Autoclavable
Polygrid Wire Racks Heat-cured Epoxy Coated, Autoclavable • Chemical and corrosion-resistant steel wire racks are coated with heat-cured epoxy. • Epoxy coatings are unaffected by organic solvents, salts, weak acids and weak alkalis • Will withstand a temperature range of -223ºC (-369ºF) to 121ºC (250ºF); autoclavable • Rack has square holes, three decks, a slotted grid bottom and reinforced edges
Revolver Tube Workstation Set. 4 interlocking 4-way Blocks (racks) per set Blocks in 4 colors (Green, Red, Blue, Yellow) Each block measures: 108x108x69mm 1 set of 4 blocks
