More Racks. LOOK HERE

Polygrid Wire Racks
Heat-cured Epoxy Coated, Autoclavable
• Chemical and corrosion-resistant steel wire racks are coated with heat-cured epoxy.
• Epoxy coatings are unaffected by organic solvents, salts, weak acids and weak alkalis
• Will withstand a temperature range of -223ºC (-369ºF) to 121ºC (250ºF); autoclavable
• Rack has square holes, three decks, a slotted grid bottom and reinforced edges

Scintillation Rack
for 20ml Vials (27mm diameter)
100-place, Polypropylene
1 each

120-place Tube RIA Rack, Polypropylene
for 13-16mm diameter tubes
White color, 1each

120-place Tube RIA Rack, Polypropylene
for 16-20mm diameter tubes
White color, 1 each

Pipette Support Rack
Horizontal support for 12 pipettes
Made from HDPE (High Density Polyethylene)
1 each

15ml & 50ml Tube Transformable Cube Racks
With inserts, each rack can be transformed into a 16 x 15ml tube rack or a 9x50ml tube rack
2 inserts/rack, 5 racks/pack

16-hole Square Floating Rack
for 1.5ml-2.0ml Microcentrifuge tubes
4 racks/pack

16-place Round Polyfoam FloatRacks
4 holes fit 500µl/0.65ml microtubes
12 holes fit 1.5-2.0ml microtubes
3-3/8" diameter, Black color, 5/pack

18-place, round (6 x 0.2ml, 6 x 500ul, and 6 x 1.5ml) Tube Blue Floating Multi-Tube Racks with handle, use with beakers or water baths, 5/pack

5-½" wide
Made from 1/4' Clear Acrylic Plastic
For Single or Multi-Channel Pipettors
1 each

3-color Set (Blue, Red, Purple)
Single-Place Pipettor Clamp-Ette

20-hole (1.5-2.0ml MicroTubes)
TPX® Floating Rack, 1/each

20-hole (for 500ul/0.65ml MicroTube)
TPX® Floating Rack, 1/each

20-hole Round Floating Rack
(for 1.5-2.0ml tubes)
Polypropylene, 4/pack

20-hole Round Floating Rack
for 1.5ml-2.0ml Microcentrifuge tubes
4 racks/pack

20-place (2x10) Acrylic Rack
for 17mm diameter tubes and vials
1 each

Shown on left of the Photo

For 30mm diameter tubes
Use with 20ml amd 30ml Histo Vials
and 50ml Conical Tubes
Rigid, durable polystyrene
6 racks/pack

2-step autoclavable polypropylene
Places are numbered for tube identification
Fits 1.5 - 2.0ml microtubes
1/each, 6/case

2-step autoclavable polypropylene
Places are numbered for tube identification
Fits 500µl, 0.65ml microtubes
1/each, 6/case

216-place Tube RIA Rack, Polypropylene
for 10-13mm diameter tubes
White color, 1 each

119x78mm, use in Water Baths
For l.5ml - 2.0ml microtubes
24-hole
10.8mm Hole Diameter
4/pack

Floating Foam Tube Rack with Handle
Yellow
For 1.5ml - 2.0ml microtubes
5/pack

For organizing, the MagPette with magnets attaches to most metal surfaces.
Holds two pipettors
Purple color, 1 unit

ThermoSafe Benchtop System
30-place Styrofoam Freezer Chiller-Shipper
Rack insert holds 15 x 500µl/0.65ml
and 15 x 1.5-2.0ml microcentrifuge tubes
Made from styrofoam, 1-1/4" wall thickness
Refrigerant gel packs included
1 unit

32 peg Drying Rack
with free standing base/support
Epoxy coated steel wire
1 unit

(Model RK6400)
Accommodates different size tubes:
5 x 50ml tubes or 30mm diameter,
8 x 15ml or 17x100mm test/culture,
10x(12x75mm) test/culture tubes, and
12 x 1.5-2.0ml microcentrifuge tubes.
Specify color, 4 racks/pack

36-place 50ml Tube Rack, Poxygrid Epoxy-Coated Steel Wire
22.9 x 22.3 x 8.9cm (9 x 8⅞ x 3½”), 1 each

Made from 1/4" Clear Acrylic Plastic
Holds 3 Single Channel Pipettors
1 unit

3-place Pipettor Clamp-Ette Racks
3-color set (Blue, Red, and Purple)
Set of 3

DryChill™ Ice-Free Cooling Tube Blocks
• Ice-free, stable cooling for sample tubes • Unique design reduces condensation
• Maintains 4°C for up to +200 minutes (3 hours 20 minutes)
• Blocks for 4 tube sizes: 0.2ml PCR Tubes, 1.5/2.0ml MicroTubes, 15ml & 50 ml Conical Tubes
• Visual temperature indicator / alert (Changes from purple to pink color when warms)

Specify Color
40-place (4 x 10 format), Wet-Dry Tube Rack for 17-20mm diameter tubes
Autoclavable, Snaps together, 1/each

MicroRack for 500µl/0.65ml microtubes
Rectangular, 9.5"L x 5.09"W x 2.375"L, 1/4" thick

For complete Beta-Box with MicroRack,
see Cat. #65777.

MicroRack for 1.5ml - 2.0ml microtubes
Rectangular, 9.5"L x 5.09"W x 2.375"L, 1/4" thick

For complete Beta-Box with MicroRack,
see Cat. #65778.

MicroRack for Cryogenic vials (12.5mm diameter)
Rectangular, 9.5"L x 5.09"W x 2.375"L, 1/4" thick

For complete Beta-Box with MicroRack,
see Cat. #65779.

For 500µl/0.65ml tubes
Alpha-numeric
Non-skid feet
Tiered format

For 1.5/1.7ml tubes
Alpha-numeric
Non-skid feet
Tiered format

48-place Scintillation Vial Rack with cover. Designed for popular 23mm diameter glass or plastic vials. Made from HDPE 1/each

Made from 1/4" White Acrylic Plastic
Holds 4 Single Channel Pipettors
1 unit

Made from acrylic
Clear

Made from HDPE (High Density Polyethylene)
White

4-place Pipettor Rack Workstation
Made of white acrylic
with dual tip bins
1 unit

Floating Foam Tube Rack with Handle
Green
For 50ml conical tubes
5/pack

Blue, 4-shelf Serological Pipet Rack
with magnets
Measures 291 x 88 x 401 mm
1 unit

4-shelf Serological Pipet Rack
Specify Unit, see below
Measures 291 x 88 x 401 mm
1 unit

PCR ActionRACK™ with Friction-Fit Lid
For 0.2ml Tubes, Strips, or one Plate
Orange Fluorescent color, Polypropylene
96-place (8x12) format, 5 racks/pack

50-place InterLock Rack
5x10 format; 12.5mm diameter holes
Use with CryoVial® Self-Standing cryogenic vials
>Specify Color (L, R, B), 4/case

50-place Test Tube Peg Racks
Blue color, 2/pack

50-place Rack
Vials Lock-in for Easy One-Hand Operation

Blue color, 1/each

5-place Pipettor Rack (Holder) - Acrylic
with 3 powerful magnets for
attachment to metal surfaces
1 each

Specify Color
60-place (5 x 12 format
Wet/Dry Tube Rack
(for 15-16mm diameter tubes)
Autoclavable, Snaps together
1/each

6-place Pipettor Stand
Made from durable ABS plastic
Blue Color, 1 each

1/4" Thick
Specify Clear Color
or Fluorescent Color
1/each

Made from HDPE (High Density Polyethylene)
White
Holds single or multi-channel pipettors

Made from HDPE (High Density Polyethylene)
Black

6-place Carousel Stand
Designed for pipettors sold by
Life Science Products
1 each

6-place Carousel Pipettor Stand, 1 each

For 35mm diameter bottles
Autoclavable
Epoxy-coated Steel

6-place Linear Pipettor Stand
Designed for pipettors sold
by Life Science Products
and other companies
1 each

6-place Linear Pipettor Stand, 1 each

6-place Single Channel Linear Pipettor Stand
for Discovery Pipettors and other brands
1/each

72-peg Drying Rack
Designed for wall mounting
Made from High Impact Polystene
1 unit

Saves glassware from chips and cracks
Holds up to 72 pieces of labware
Heavy-Duty Polystyrene Plastic construction
Designed to Stand on bench or Mount on wall
1 unit

8-hole (1.5-2.0ml MicroTubes)TPS® Floating Rack, 1/each

8-hole Round Floating Rack
(for 1.5-2.0ml micro tubes)
Polypropylene, 4/pack

8-hole (for 500ul/0.65ml MicroTube)
TPX® Floating Rack, 1/each

Floating Foam Tube Rack with Handle
Blue
For 15ml conical tubes
5/pack

Saves glassware from chips and cracks
Holds up to 90 pieces of labware
Vinyl-coated steel wire
Designed to stand on bench
1 unit

Specify Color
90-place (6 x 15 format), Wet-Dry Tube Rack for 10-13mm diameter tubes
Autoclavable, Snaps together, 1/each

96-place MicroTube Rack (8x12)
Autoclavable Nylon
for 1.5-2.0ml microcentrifuge tubes
Specify color, 4/pack

96-place MicroTube Rack (8x12)
Floatable Foam
for 1.5-2.0ml microcentrifuge tubes
10/pack

96-place Test Tube Peg Racks
White color, 2/pack

Reversible TubeRack (gridded)
with Clear Natural Snap-in Lid
One side: 96x0.5ml; One side: 96x1.5-2.0ml
Specify Color, 5/pack

Clear Acrylic, 4-shelf Serological Pipet Rack
Measures 291 x 88 x 401 mm
1 unit

Polypropylene, PCR rack with Friction lid
Alpha-numeric grid
For 96 x 0.2ml PCR tubes, 8 or 12 PCR Strips, or one PCR Plate
5/pack (Assorted 5-pack)

Polypropylene, PCR rack with hinged lid
Alpha-numeric grid
For 96 x 0.2ml PCR tubes, 8 or 12 PCR Strips, or one PCR Plate
Assorted 5-pack (R-B-G-Y-O)

8 x 12 format, Reversible rack
Assorted Colors
One Side fits 500µl to 0.65ml size microtubes
Flip Side fits 1.5ml, 1.7ml, 2.0ml microtubes and Cryovials
5/pack

Benchtop Cryo-Station
• Cryogenic EPS Container for Freezing Samples
• Ideal for Liquid Nitrogen snap freezing technique
• Super-insulating triple density expanded polystyrene (EPS)
• Low thermal mass of EPS minimizes initial liquid nitrogen boil-off
• Lightweight construction • No glass liner to break
• 2” thick lid eliminates condensation

Cryo-Dipper
• 36-place (12.5mm diameter holes) • 2-Tiered PVC holder design
• Quickly load & retrieve sample tubes when freezing
• Holds externally threaded cryo vials, 0.5ml, 1.5ml, 2.0ml tubes
• Movable weights prevent floating • Durable PVC construction

Cryo-Net
• Nylon mesh bag for quick sample freezing
• Once frozen, remove all the tubes immediately
• Open design for unimpeded liquid nitrogen access

Blue Clear Acrylic color,
96-place PCR Tube Insert for Ice Buckets or Ice Pans
For 0.2ml PCR Tubes, Place on top of ice
Alpha-Numeric Grid, (Dimensions: 6"x6" size), 3/pack

Blue Clear Acrylic color
96-place Cryogenic Tube Insert for Ice Buckets or Ice Pans
for 1.2ml to 5.0ml cryogenic tubes,Place on top of ice
Alpha-Numeric Grid, (Dimension: 6"x10" size), 3/pack

Blue Clear Acrylic color
96-place MicroTube Insert for Ice Buckets or Ice Pans
For 1.5ml to 2.0ml microcentrifuge tubes, Place on top of ice
Alpha-Numeric Grid, (Dimensions: 6"x6" size), 3/pack

Blue Clear Acrylic color,
96-place MicroTube Insert for Ice Buckets or Ice Pans
For 500ul/0.65ml microcentrifuge tubes, Place on top of ice
Alpha-Numeric Grid, (Dimensions: 6"x6" size), 3/pack

Blue, 6-place Wire Epoxy Coated Rack (2x3 format), Epoxy Coated for 58-60mm, 200ml/250ml Bottles, 1 each

12-place 90ml Rectangular Urine Bottle Transit Containers, ideal
for Transport & Storage of Urine samples
with Hinged, Tamper-Evident, Lockable Lid
Includes 500 ties & 250 locks
24 containers/case

1-place Syringe Containers, ideal
for Transport & Storage of samples
with Hinged, Tamper-Evident, Lockable Lid
Includes 500 locks
50 containers/case

2-place 30ml Tube Containers, ideal
for Transport & Storage of Histo samples
with Hinged, Tamper-Evident, Lockable Lid
Includes 1000 ties and 5000 locks
100 containers/case

96-place (8 x 12 format) Containers, for
Vial & MicroTube Transport & Storage unit, with
Hinged, Tamper-Evident, Lockable Lid
Includes 500 ties and 250 locks
24 containers/pack

CoolCaddy™ PCR WorkStation Cooler
for PCR Plate, Tubes, 8-Strips, MicroTubes, Cryo Vials,and
50ml Reservoir Basin. Maintains 4°C for 5 hours on bench.
Dimensions: 8.3x6.8x1.8in., Made of aluminum, 1/unit

CoolCube™ Cooler (Dual-Sided)
for MicroTubes and PCR Plate/Tubes
Maintains 0°C for 4 hours on bench
1/each

Cryogenic Vial Racks
Choose from a variety of racks

Grip Racks
This specially designed tube/vial rack features rubber grips that hold tubes/vials in place when decanting liquid.
• Produced from Polyoxymethylene (POM), autoclavable.
• Holds various sizes up to 17mm diameter (Low Profile model).
• High Profile model features "squeeze 'n decant" tube ejector.
• Low profile design allows for easy viewing of labels on tubes.
• 50-place (5 x 10 configuration) • Autoclavable.

Photo: Top Rack
15-place, Two-Piece BenchTop unit
For 15ml & 50ml conical tubes
Lower section holds water or crushed ice.
Made from polystyrene, Stackable, 1 each

105-place Ice Rack, 2-piece, Stackable
For 500ul (0.65ml) microtubes or smaller
8mm diameter holes, Lower section for Ice or Water
8-1/2"L x 4-7/8"W x 2-5/8"H
1 each

120-place Ice Rack, 2-piece, Stackable
For 1.5ml - 2.0ml microtubes
12mm diameter holes, Lower section for Ice or Water
16"L x 5-5/8"W x 2-1/4"H
1 each

45-place Ice Rack, 2-piece
For 1.5ml - 2.0ml microtubes
12mm diameter holes, Lower section for Ice or Water
9 x 5 format (45-place)
8-1/2"L x 4-3/4"W x 2-1/4"H
1 each

ICE RACKS - Crushed Ice Microtube Workstations
• Designed for crushed Ice • Polypropylene
• Temperature Rating: -80°C to +135°C
• Detachable “lift-off” lids • Economically priced
• For ScrewCap and SnapCap microcentrifuge tubes
• Fill with Crushed Ice, or other temperature controlling materials
• Organize 0.5ml to 2.0ml MicroTubes • Numbered Cavities for sample ID

White Color
Maintain 0°C for up to 5 hours
One side holds Twenty 500µl/0.65ml microtubes
Other Side holds twenty 1.5-2.0ml microtubes
1 rack

Blue Color
Maintain -10°C to -20°C for up to 3 hours
One side holds Twenty 500µl/0.65ml microtubes
Other Side holds twenty 1.5-2.0ml microtubes
4 racks/case

96-place Iso-Freeze PCR Plate Racks
Filled with temperature dependent gel
SBS compliant for automation
Color Changes: Purple=Cold, Pink=Warm
Hold 4°C for about 2.5 hours
2/pack, 5/case

Mfgr #5640-T4

Iso-Freeze PCR Racks with Lid
96-place
Filled with temperature dependent gel
Color Changes: Green=Cold, Yellow=Warm
Holds 4°C for about 3 hours with lid on, 2 racks/pack, 5 packs/case (10 racks)

Mfgr #5640-T6

Iso-Freeze MicroTube Rack with Lid
24-place
Filled with temperature dependent gel
Color Changes: Green=Cold, Yellow=Warm
Holds 4°C for about 2.5 hours
1 rack/pack, 5 racks/case

Mfgr #5630-T6

6-place Single Channel Carousel Pipettor Stand
Universally fits most Pipettors
1/each

For organizing, the MagBox with magnets attaches to most metal surfaces.
Holds miscellaneous items.
Orange color, 1 unit

For organizing, these racks with magnets attach to most metal surfaces.
MagLab™ Assorted 4/pack
Includes: MagWipe (green), MagRack (blue), MagPette (purple), and MagBox (orange).

For organizing, the MagWipe with magnets attaches to most metal surfaces.
Holds a standard (11x21cm) Kimwipes® box
Green color, 1 unit

8 x 12 format, Reversible rack
Natural Color
One Side fits 500µl to 0.65ml size microtubes
Flip Side fits 1.5ml, 1.7ml, 2.0ml microtubes and Cryovials
5/pack

For 10-13mm tubes & culture tubes, 90-place (6x15) No-Wire Autoclavable Rack, 1 each
Submersible and Stackable. Dim: 24.6 x 10.4 x 6.4cm (9.7" x 4.1" x 2.5”)

For 13-16mm tubes & culture tubes, 60-place (5x12) No-Wire Autoclavable Rack, 1 each
Submersible and Stackable. Dim: 24.6 x 10.4 x 6.4cm (9.7" x 4.1" x 2.5”)

For 16-20mm tubes & 15ml conical tubes, 20-place (4x5) No-Wire Autoclavable Rack, 1 each
Dim: 12.8 x 10.5 x 7.2mm H (5.1" x 4.1" x 2.8")

For 16-20mm tubes & 15ml conical tubes, 40-place (4x10) No-Wire Autoclavable Rack, 1 each
Submersible and Stackable. Dim: 24.6 x 10.4 x 6.4cm high (9.7" x 4.1" x 2.5”)

For 20-25mm tubes & culture tubes, 24-place (3x8) No-Wire Autoclavable Rack, 1 each
Submersible and Stackable. Dim: 24.6 x 10.4 x 6.4cm (9.7" x 4.1" x 2.5”)

For 25-30mm tubes & 50ml conical tubes, 21-place (3x7) No-Wire Autoclavable Rack, 1 each
Submersible and Stackable. Dim: 24.6 x 10.4 x 6.4cm high (9.7" x 4.1" x 2.5”)

For 10-13mm tubes & culture tubes, 90-place (6x15) No-Wire GRIP Autoclavable Rack, 1 each
Submersible and Stackable. Dim: 24.8 x 10.5 x 7cm (9³/₄" x 4¹/₈" x 2³/₄")

For 15-16mm tubes & culture tubes, 60-place (5x12) No-Wire GRIP Autoclavable Rack, 1 each
Submersible and Stackable. Dim: 24.8 x 10.5 x 7cm (9³/₄" x 4¹/₈" x 2³/₄")

For 18-20mm tubes & culture tubes, 40-place (4x10) No-Wire GRIP Autoclavable Rack, 1 each
Submersible and Stackable. Dim: 24.8 x 10.5 x 7cm (9³/₄" x 4¹/₈" x 2³/₄")

12-place Rack (3x4) - No-Wire™
for 25mm diameter bottles/vials
Autoclavable Polypropylene
12.8 x 10.5 x 4.3cm H (5.08 x 4.15 x 1.70")
1/each

20-place Rack (4x5) - No-Wire™
for 18-20mm diameter bottles/vials
Autoclavable Polypropylene
12.8 x 10.5 x 4.3cm H (5.08 x 4.15 x 1.70")
1/each

30-place Rack (5x6) - No-Wire™
for 15-16mm diameter bottles/vials
Autoclavable Polypropylene
12.8 x 10.5 x 4.3cm H (5.08 x 4.15 x 1.70")
1/each

42-place Rack (6x7) - No-Wire™
for 12-13mm diameter bottles/vials
Autoclavable Polypropylene
12.8 x 10.5 x 4.3cm H (5.08 x 4.15 x 1.70")
1/each

6-place Rack (2x3) - No-Wire™
for 30mm diameter bottles/vials
Autoclavable Polypropylene
12.8 x 10.5 x 4.3cm H (5.08 x 4.15 x 1.70")
1/each

OneRacks™ Tube Racks, for 5 Tube diameter sizes
White Color, Made from Delrin Polymer (-40 to +121°C)

• Tube Racks for 5 different size tube diameters
(12-13mm, 16-17mm, 18-20mm, 25mm, and 30mm diameter tubes)
Rack Features
• Molded coordinates for tube orientation
• A stable design for use in water baths
• A flat labeling area for easier identification
• Unique 'tear drop' shaped openings for better retention of tubes
• The highest chemical and heat resistance (-40 to +121°C), Autoclavable

PCR and MicroTube Work-Up Rack System
Assorted Fluorescent colors (B,G,O,P,Y)
5 rack systems/pack

96-well PCR Cooler Racks
Ice-Free Cooling System (with Coolant Gel)
Changes color from Warm to Cold temperature
For PCR Preparation and Storage
Consistent and Reliable
L x W x H: 4.3 x 5.8 x 1.9 in (11 x 14.8 x 4.8 cm)
2/pack

96-well Low Temp PCR Rack
Slide, Set, Work & Store PCR Samples
The lid is ambidextrous; it can be switched to accommodate left or right hand orientation. The lid is detachable. Holds 0.2mL tubes, individual or strip. 96 wells 8 x 12 configuration. Store down to -80ºC.
Assorted 5/pack (Blue, Green, Purple, Yellow, Orange)

Petri-Dish 30-place Dispenser
Holds thirty 100x15mm dishes
Made from sturdy acrylic
1/each

Petri-Dish 6-place Holder Rack
Holds six 100x15mm dishes
Wire
1/each

Pipet Tray Rack
HDPE (High Density Polyethylene)
1 each

6-place Rack for Pi-Pump II
1 each

ProPette™ nUVaClean - UV Decontaminaton Carousel for Pipettors
Designed to universally accommodate popular pipettors
1/each

72-place Rack for 16-17mm well diameter tubes (5ml-10mL), Rack Dim: L x W x H: 12.7 x 25.0 x 7.0cm
- Ideal for 16x100mm tubes, 16x125mm tubes, and 17x100mm tubes

40-place Rack for 18-20mm well diameter tubes, 10-18 mL, Rack Dim: L x W x H: 10 x 25.2 x 8.3 cm
- Ideal for 15ml conical tubes, 18x100mm tubes, and 20x100mm tubes

40-place Rack for 25mm well diameter tubes, 10-18 mL, Rack Dim: L x W x H: 12 x 30 x 9.2 cm
- Ideal for 25x125mm, and 25x150mm tubes

24-place Rack for 30mm well diameter tubes, 15-50 mL, 3x8 format, Rack Dim: L x W x H: 11 x 28.2 x 8.5 cm, 8 racks/case - - Ideal for 50ml conical tubes

Holds up to 94 pipets. (232mm Diax475mmH)

24-place Rack for 20ml Scintillation Vials, 30mm diameter (11-3/4" x 5" x 3-1/4", Shelf height is 1-3/4"), autoclavable polypropylene, 1/each

Cargo™ Serological Pipet Racks
Magnets connect to lab equipment
Racks easily stack together
Transparent Blue, 3 racks/pack

72-place Rack for Small Serum Vials or Tubes, with handles (for 10mm-13mm vials, 9-3/8' x 4-3/8' x 9-1/2'; Top shelf height is 1-5/8'), Made from autoclavable polyproylene, 1/each

40-place Rack for Small Serum Vials or Tubes, with handles (for 13mm-16mm vials, 10" x 4-3/8" x 9-1/2", Top Shelf height is 1-5/8"), Made from autoclavable polypropylene, 1/each

40-place Rack for Small Vials or Tubes, with handles (for 16mm-20mm vials, 10" x 4-3/8" x 9-1/2", Top Shelf height is 1-5/8"), Made from autoclavable polypropylene, 1/each

Holds:
64x1.5ml-2.0ml microcentrifuge tubes
V-bottom cavities
3 levels; 16 cavities format (64)

100-place StackRACK
for 1.5ml/2.0ml microcentrifuge tubes
Autoclavable polypropylene, 1 each

Styrofoam Storer
50-place for Freezer Storage
or Transport
21L x 11W x 6.5H (cm)
for 1.5-2.0ml microtubes or 1.2ml cryotube
Alpha-numeric Grid
5/pack

Styrofoam Storer
100-place for Freezer Storage
or Transport
33L x 9.5W x 7H (cm)
for 1.5-2.0ml microtubes or 1.2ml cryotube
Alpha-numeric Grid
5/pack

SureStand™ Pipettor Rack, for 3 pipettors, accepts one multi-channel

SureStand™ Pipette Rack, for 6 pipettors, accepts up to four multi-channel

SureStand™ Pipettor Rack, for 8 pipettor, accepts up to six multi-channels

25-place, Thermometer Storage BenchTop Rack, with hamdles. Stores in up-right (vertical) position, Made of polypropylene, (5-7/8' x 8-1/2' x 9-7/8'H), 1/each

6-place Single Channel Carousel Pipettor Stand
Universally fits most Pipettors
1/each